ACROSS THE WORLD, ALUCOBOND® A2 is the only non-combustible aluminum composite panel used in architecture.
Due to its non-combustible core, this fantastic product meets stringent fire regulations and hugely increases the possibilities when it comes to creative building design.
As with all ALUCOBOND® products, ALUCOBOND® A2 allows for simple processing, is impact-resistant, break-proof, and weatherproof – and above all non-combustible.
Cutting
Punching
Contour Cutting
Bending
Roll Bending
Routing & Folding
Riveting
Screwing
ALUCOBOND® A2 panels of any thickness can be punched using conventional sheet punching machines.
- For clean cuts use sharp tools and dies with minimal cutting clearance (0.1mm). Punching will cause a slight deflection at the cut edge of the impact side.
- Holes with a minimum diameter of 4mm can be punched.
- Distance between the adjacent hole edges should not be less than 4mm
- Please ask for detailed information on how to perforate ALUCOBOND® A2 before proceeding.
