
THICKNESS | CODE | STANDARDS | UNIT | 3MM | 4MM | 6MM |
---|---|---|---|---|---|---|
Thickness of Aluminium Layers | [mm] | 0.5 | ||||
Weight | [kg/m²] | 4.5 | 5.5 | 7.3 | ||
Width | [mm] | 1000 / 1250 / 1500 | ||||
TECHNICAL PROPERTIES | CODE | STANDARDS | UNIT | 3MM | 4MM | 6MM |
Section modulus | W | DIN 53293 | [cm³/m] | 1.25 | 1.75 | 2.75 |
Rigidity | E·J | DIN 53293 | [kNcm²/m] | 1250 | 2400 | 5900 |
Alloy / Temper of Aluminium Layers | EN 573-3 EN 515 | EN AW 5005A (AIMg1) H22/H42 | ||||
Modulus of Elasticity | EN 1999 1-1 | [N/mm²] | 70’000 | |||
CORE | CODE | STANDARDS | UNIT | 3 MM | 4 MM | 6 MM |
Polyethylene, Type LDPE | [g/cm³] | 0.92 | ||||
SURFACE | CODE | STANDARDS | UNIT | 3MM | 4MM | 6MM |
Lacquering | Coil Coating Fluorocarbon based (e.g. PVDF) | |||||
Gloss (initial value) | EN 13523-2 | [%] | 30-80 | |||
Pencil Hardness | EN 13523-4 | HB-F | ||||
ACOUSTICAL PROPERTIES | CODE | STANDARDS | UNIT | 3MM | 4MM | 6MM |
Sound Absorption Factor | αs | ISO 354 | 0.05 | |||
Sound Transmission Loss | Rw | ISO/DIS 717-1, EN ISO 140-3 | [dB] | 25 | 26 | 27 |
Loss Factor | d | EN ISO 6721, Frequency range 100-3200 Hz | 0.0072 | 0.0087 | 0.0138 | |
THERMAL | CODE | STANDARDS | UNIT | 3MM | 4MM | 6MM |
Thermal Resistance | R | DIN 52612 | [m²K/W] | 0.0069 | 0.0103 | 0.0172 |
Heat Transition Coefficient | U | DIN 4108 | [W/m²K] | 5.65 | 5.54 | 5.34 |
Temperature Resistance | [ºC] | -50 to +80 |
Wind load and permissible panel sizes


The graphs for 3 mm and 4 mm thick ALUCOBOND® indicate the maximum permissible panel length (σ = 53 N/mm²) (without having to add a stiffener) based in applicable design wind load and panel width. Values apply to 4-side supported panels. Values for other systems on request.
ALUCORE® is an aluminium composite panel consisting of two cover sheets and a honeycomb core of aluminium.
Following in the footsteps of the world-wide established ALUCOBOND® trademark, ALUCORE® is also a composite material for a variety of applications in transport and industry or architecture, showing excellent product properties such as extraordinary flatness, large variety of colours and high formability.
The aluminium honeycomb core gives the composite panel a high rigidity and an extremely low weight. ALUCORE® therefore provides the decisive advantage where very high demands are made on the material for applications such as façade cladding or roofing, e.g. if exposed to extremely high wind load and for large self-supporting roofs.
ALUCORE® is the first lightweight panel that you, too, will absolutely insist as being: a bond for life.