|Thickness of Aluminium Layers||[mm]||0.5|
|Width||[mm]||1250 / 1500|
|Section modulus||W||DIN 53293||[cm³/m]||1.75|
|Alloy / Temper of Aluminium Layers||EN 573-3 / EN 515||EN AW 5005A (AIMg1) / H22/H42|
|Modulus of Elasticity||EN 1999 1-1||[N/mm²]||70.000|
|Tensile Strength of Aluminium||EN 485-2||[N/mm²]||Rm ≥ 130|
|0.2 % Proof Stress||EN 485-2||[N/mm²]||Rp0,2 ≥ 90|
|Elongation||EN 485-2||[%]||A50 ≥ 5|
|Linear Thermal Expansion||EN 1999 1-1||2.4 mm/m at 100ºC temperature difference|
|Mineral filled polymer|
|Lacquering||Coil Coating Fluorocarbon based (e.g. PVDF)|
|Gloss (initial value)||EN 13523-2||[%]||30-80|
|Pencil Hardness||EN 13523-4||HB-F|
|Sound Absorption Factor||αs||ISO 354||0.05|
|Sound Transmission||Rw||ASTM E90||[dB]||STC = 30, OITC 24|
|Thermal Resistance||R||ASTM C518||[m²K/W]||0.009|
|Temperature Resistance||[ºC]||-50 to +80|
Wind load and permissible panel sizes
ALUCOBOND® plus 4 mm
The graphs for 4 mm thick ALUCOBOND® plus indicate the maximum permissible panel length (σ = 51 N/mm²) (without having to add a stiffener) based in applicable design wind load and panel width. Values apply to 4-side supported panels. Values for other systems on request.
ALUCORE® is an aluminium composite panel consisting of two cover sheets and a honeycomb core of aluminium.
Following in the footsteps of the world-wide established ALUCOBOND® trademark, ALUCORE® is also a composite material for a variety of applications in transport and industry or architecture, showing excellent product properties such as extraordinary flatness, large variety of colours and high formability.
The aluminium honeycomb core gives the composite panel a high rigidity and an extremely low weight. ALUCORE® therefore provides the decisive advantage where very high demands are made on the material for applications such as façade cladding or roofing, e.g. if exposed to extremely high wind load and for large self-supporting roofs.
ALUCORE® is the first lightweight panel that you, too, will absolutely insist as being: a bond for life.